image description


Forum Index » Profile for RichStudio » Messages posted by RichStudio
Author
Message
16.4.2 » Board loses sound when connecting a computer via firewire » Go to message
My computers are all optimized for audio whether via firewire or USB.
I just purchased a good cable.
I will try the boot then restart and see how that goes.
I may reinitialize the board as well to see if that helps as this just started happening with a setup we had been using for a year plus.
Thanks for the ideas!
16.4.2 » Board loses sound when connecting a computer via firewire » Go to message
Thanks for the response. Guess i just change the firewire ID every time.
Best,
Rich
16.4.2 » Board loses sound when connecting a computer via firewire » Go to message
I also tried starting the mixer first, then computers. Vice verse, hot plugged. Nothing worked.
Thanks,
16.4.2 » Board loses sound when connecting a computer via firewire » Go to message
When I connect my PC (Windows XP Pro) or Mac (OSX 10.8 ) to my 16.4.2 via fire wire, the mixer sound quits.
This just started happening (at a show no less).
I figured out that I had to change the fire wire ID in system menu and then the sound comes back.
However, we used the board for months without ever having to do this.
I have the latest firm ware and am using the latest Universal Control and drivers for both the PC and Mac computers.
Is there a setting I messed up?
Thanks,
Rich
16.4.2 » Lost all fat channel and FX presets » Go to message
Thanks for the clarification " manual police".
Just looking for user insight to speed the process.
As I stated, I figured it out and posted how I did it.
If you don't want to assist, then don't post, as many people are not "manual people" or have access during a live session which was my scenario last night.
16.4.2 » Lost all fat channel and FX presets » Go to message
Just figured it out. You have to highlight all the empty presets in Universal Control then "Get" from the mixer.
All presets are back.
Thanks,
Rich
16.4.2 » Lost all fat channel and FX presets » Go to message
I also did a factory refresh. Still missing all Fat Channel presets.
16.4.2 » Lost all fat channel and FX presets » Go to message
I have the same issue but I cannot figure out how to get the Fat Channel presets back.
Any help is appreciated.
Thanks,
Rich
16.4.2 » IPhone 4 not seeing my 5ghz router » Go to message
Thanks guys. I will sort it out.
Best,
Rich
16.4.2 » IPhone 4 not seeing my 5ghz router » Go to message
I was trying to connect to my Netgear router. The router has two separate sides, 2.5 ghz & 5 ghz. The iPhone4 sees the 2.5 ghz side but not the 5 ghz side like my iPad does. I tried to manually the router but to know avail. Any setting I need to do on the phone?
Thanks,
Rich
16.4.2 » Studio Live Remote does not update it's view » Go to message
Thanks guys. The backup and reinstall fixed it.
Best,
Rich
16.4.2 » Studio Live Remote does not update it's view » Go to message
When the Stdio Live software starts, the views do not update on the iPad to show the current settings in Studio Mix / Computer.. If I adjust the board via the iPad, the Stuio Mix view n the computer adjust / matches the iPad canges. If I adjust from the computer, the iPad does not change to match the computer / Studio Live.
I hope this can be changed. It is very confusing trying to mix with this current scenario.
Rich
Studio One General Discussion » Studio One activation question » Go to message
Hello,
I activated my Studio One 2 Pro like I did with Studio One. (enter serial and key etc).
Program runs and shows registered to me.
However, if I shut off my network card, which I do alot, as I only use for updates etc, Studio One 2 will not start and requests me to activate.
If I turn the network card on and gain internet access, Studio One 2 starts with no problems.
What am I missing?
I have Studio One Pro (1) on a laptop with the wifi / internet disabled and that version starts up with no issues.
Thank you,
Rich
16.4.2 » New Universal Control 1.5.3 does not install right on Win 7 64 bit » Go to message
@ arnoldsq, nope. I did the install with correct procedure. Seems to be a Win7 64bit bug. Installed fine on my XP Pro machine.
Studio One General Discussion » My VST Plugins will not show up / scan in Studio One » Go to message
Thanks. I found a post regarding the 32bit plugs and 64bit. Install 32bit version of Studio One and all is good.
Best
Rich
 
Forum Index » Profile for RichStudio » Messages posted by RichStudio