image description


Forum Index » Profile for Sammy1283 » Messages posted by Sammy1283
Author
Message
24.4.2AI » audible fan noise from studio users » Go to message
I actually PM'd the OP and got this response....

Hi Sam,

I was contacted by someone at Presonus who had seen my post who let me know that they had fixed one of the issues (the Post EQ/Dyn button not functioning on any channels). I responded and began a discussion about the fans and whether or not the slower quieter fans that I had installed would be enough to cool the electronics. I sent them the specs on the fans that I purchased and they seem to think that it would be fine in my particular environment. (I live on the Northern California coast which has a pretty cool climate).

So, I am using the mixer and it's working.

BUT it's important to know that I voided my warranty by installing these fans. And I got no particular assurance from Presonus that they would honor a warranty if there were something else wrong with the mixer.

If you are considering this mixer, I would certainly recommend trying to contact someone at Presonus and having the discussion with them about your use of the mixer. It DOES sound much better than the old one.

Hope this helps!

Best,
Timbo


Studio One General Discussion » PC users please help re:Tv connection » Go to message
Ahhh maybe thats my issue.....

There it is... I have a duel link DVI-D cable with a DVI-I adapter.

THANK YOU!
Studio One General Discussion » PC users please help re:Tv connection » Go to message
Yes i did mean OUTPUTS good thing you knew what i meant! Never make that mistake again!

I plugged my first TV into the VGA output of my pc and got a picture no problem. Just doesnt work converting the DVI to VGA for the 2nd TV.
Because I only have 1 VGA output on the pc. Computer monitor works fine with the TV plugged straight into DVI pc output.
Studio One General Discussion » PC users please help re:Tv connection » Go to message
I have 2 tv's I want to hook up at the same time. The PC has DVI and VGA inputs. My first monitor is plugged in the VGA and i had a small comp monitor plugged into the DVI, worked fine.

Now because the 2nd monitor only has VGA input, i went to the store and bought a DVI>VGA adapter. Plugged the 2nd monitor in via DVI from the PC, to the DVI>VGA adapter, into the 2nd tv. NOTHING. In my graphics options its not even showing me 2 monitors.

I took out the adapter and plugged in my PC monitor again via straight DVI, and it works fine.

Any ideas? I feel like something is just off in the settings that its not recognizing the DVI>VGA switch up. But cant figure out why??
Studio One General Discussion » Studio One and Tascam DM-3200? » Go to message
Anyone using the Behringer x32 board with Studio One?
Studio One General Discussion » Studio One and Tascam DM-3200? » Go to message
I'm actually looking at quite a few boards if anyone has any suggestions or input.

Looking for at least 16 channels, firewire, motorized faders and a good EQ section. Transport controls not as important but would be nice.

Any suggestions?
Studio One General Discussion » Studio One and Tascam DM-3200? » Go to message
I'm looking at getting a new board in the next few weeks and am very interested in the Tascam DM-3200.

Anyone ever use one of these or know how it integrates with the Studio One software?

Thanks
24.4.2AI » audible fan noise from studio users » Go to message
I was actually just wondering the same thing.

I am considering buying the 24.2.2AI and was on here reading the now LOCKED thread on the fan issue.

The OP stated that the issue got resolved and he now has the mixer integrated in his studio and everything is great.
My problem is he never said HOW the issue was resolved. Or if the fans are quiet now.

Anyone have any info on this? I will be tracking in the same room also, same as OP of this thread. Dont want to spend 3000 and have. Would rather spend the 3000 on a different mixer, hell even a 16.4 if they have quieter fans.

Oh and how does everyone like it overall? Ive read everything I could on it, and of course it sounds like the greatest board ever. Just looking for some overall personal opinions from those that have been using it for a while.


THANKS!
Studio One General Discussion » Quantize tail-end of midi notes? » Go to message
AWESOME! Thanks guys!
Studio One General Discussion » Quantize tail-end of midi notes? » Go to message
Heres my issue...

Ill record a midi part (using an Oxygen 49 keyboard), and then ill quantize it. However, the quantize only affects the start of the midi note.
THEN i go back and shorten the tail-end of each note so it doesnt overlap with the next note.

Ive tried being DEAD ON with each midi note so i wouldnt have to do this, but its damn near impossible.

It seems like there HAS to be another (easier) way!

Any help?
Studio One General Discussion » Drastically louder volumes with different programs » Go to message
Does anyone know why or have any thing to try to try to fix this......

So first, what i have hooked up. Pretty simple... A Tascam FW 1884, a presonus monitor station and a set of Equators.
There are 4 ways to control overall volume: The Tascam 1884 has a Master fader and a small 'monitor' knob. The monitor station has a knob for 'A' (the speakers i have in that input), and a main big knob for master volume. Each of these do control the overall volume of my speakers. OH and i should mention... It IS possible to disable the master fader on the Tascam, so my monitor station main knob would be my main control. I would be left with the 'monitor' knob on the Tascam, the knob 'A' on the monitor station and the main monitor station knob.

My issue... If i am in Studio one working on a song, at a decent level (about 85db), then switch to spotify, youtube, iTunes, etc. the volumes JUMPS. And not just by a few decibels, but to the point where it is non listenable. It HURTS how loud it is. And this is without ANY changing of any monitor knobs or faders.

Now i realize there should be a small increase in volume, as i am working with an un-mastered song, however the difference is just too extreme. WAY TOO extreme.

Any help or ideas to try would be GREAT! Thanks a lot guys.

ALSO, if you have these 4 options of control volume, how would you go about calibrating your system? I have calibrated it but after this i feel like my calibration is wrong.
Studio One General Discussion » Write automation with FW 1884? » Go to message
Anyone know if i can write automation with the FW 1884. Id like to ride the fader to write it. Could you explain how to do this if possible?

Also how do i map certain buttons and have it save? I linked the FREQ knob to my mid freq in EQ. and the knob controlled it fine. But when i close the plug in and reopen it, i have to link it again. Anyway to just store it?

Also, anyone elses REC button NOT arm the selected track? I do have the template installed that was created for Studio One. It has it mapped to hit the SEL+REC button and it should arm the track. However mine does not.

Any help is appreciated!
Studio One General Discussion » Miroslav Philharmonik VST for $29.99 » Go to message
So do I need SampleTank to use this?

I would like to get it at that price just to have in the back pocket...
Studio One General Discussion » Studio One and Tascam 1884- HELP » Go to message
Yea I've actually been playing around with it and have cut the FS Project out of the picture.. Im starting to get some control in Studio One with the Tascam but its still not right. ..Im gettin there.
Studio One General Discussion » Studio One and Tascam 1884- HELP » Go to message
I have no idea how to get this to work... and im at my wits end!

Its a very simple setup... I have a FS project, a Tascam FW 1884 and a Presonus monitor station. I have installed all latest drivers and updates, but nothing. ONCE I got them both to sync, but as soon as i tried opening Studio One, both firewires crashed. I got this to work with the Tascam firewired to the Project, and the Project firewired to the computer.

I have followed VERY close directions on how to get this up and running (even installed the template to get the entire board to work with Studio One) and still nothing. There HAS to be something im missing in my settings or Project setup? Or maybe my connections (both supposed to be firewired to cpu?)

If anyone has any experience with this PLEASE HELP!\\

Thanks in advance!

-Sam
 
Forum Index » Profile for Sammy1283 » Messages posted by Sammy1283