image description


Forum Index » Profile for jpettit » Messages posted by jpettit
Author
Message
Studio One Feature Requests » FR: Track/Channels consistency (position/color/name/visibility/mute/selection) » Go to message
You can create a folder from selected tracks.
You can create a bus for a folder.
FR 1 was to do it in one step.
Studio One Feature Requests » FR: Track/Channels consistency (position/color/name/visibility/mute/selection) » Go to message
LMikes post is to clarify a procedure called out in the manual and what I described as explicit mapping. It is required to make multi-out instruments to work properly. It is related to FR11 and 12.
All the FRs in the OP are still valid and make a group of things that will greatly improve arranger to mixer behavior.

I would not be surprised if many of the FRs in the OP are addressed in V3.


Studio One Forum Community Support » Can I click in the measure bar & scroll horizontal without zooming because my hand isn't steady? » Go to message
Ctrl + mouse wheel will scroll left right.
Just mouse wheel will zoom.
How do I (You fill in the blank)? » .. report SPAM » Go to message
http://forumsarchive.presonus.com/posts/list/46727.page
Studio One General Discussion » Presonus flags at half mast. Presonus' CTO Bob Tudor has passed. » Go to message
He was sitting left of Jim Odom in the 2014 PresonusSphere VIP chat session.
May he rest in peace...
Studio One Forum Community Support » Tempo Issues, » Go to message
Please explain more.
How do you know the tempo of the video?
Is it a video of a song that has the tempo 100?
It takes dedicated Video software to change the video playback rate of a video.
Studio One General Discussion » Sound Stops » Go to message
Disable "release audio device in back ground" in options/advance/audio
How do I (You fill in the blank)? » .. report SPAM » Go to message
http://forumsarchive.presonus.com/posts/list/46589.page
Studio One Forum Community Support » Align vocal recommendation » Go to message
If you like the live original tracks and also the guitar played to a click, your best bet is to beat map the song this way snapping will allow you to snap the vocals and guitar manually or through quantizing steps.
If needed see the Melodyne series for aligning vocals.

Audio Timing training
http://forumsarchive.presonus.com/posts/list/15718.page
First video in this series goes through tempo mapping.( beat mapping)
http://forumsarchive.presonus.com/posts/list/32226.page
If you want ot align vocals it is in this series on Advance Melodyne
http://forumsarchive.presonus.com/posts/list/17697.page


Studio One Feature Requests » Using Transient Detection for Triggering instead of the Gate » Go to message
Have you tried detecting the audio transients then dragging them to a MIDI track?
It creates a MIDI note for each transient that can then be adjusted to the appropriate drum and fire a VST drum sample.
Studio One General Discussion » Anyone upgraded to EZDrummer 2? » Go to message
EZD2 MIDI drop zone does not work in Studio One. It does in Sonar X3 and Reaper. Until it can be fixed in S1 here is a work around

1) On the track that has EZD2 on it put the MIDI clip you want to find similar beats to.
2) Start Tap 2 find.
3) Start S1 playing in sync with the click in Tap 2 find. ( might take a few tries)
4) The MIDI will be recorded in the Tap find 2 bar pallet,
5) Stop S1 and click "Show results in EZD2

Talk to your friendly S1 developer and ask them to support MIDI drag and drop on a VST.
Studio One General Discussion » Anyone upgraded to EZDrummer 2? » Go to message
Yes I mentioned on another post you can have tap to find pick up midi output of S1 as an input to capture an existing groove in the song to find matches
AudioBox VSL 22 » VSL 22 Zero Latency Mixer » Go to message
Sorry did. It notice you were on Mac
Can you set your buffers to lower than 128 on core audio?
If so that is practically near what "Z" gets you.
Studio One General Discussion » Anyone upgraded to EZDrummer 2? » Go to message
Enable as many channels of EZD2 as you want in the S1 instrument panel ( left of mixer) and set the drum channels out on the EZD2 mixer for the drum you want.
AudioBox VSL 22 » VSL 22 Zero Latency Mixer » Go to message
Dream no more.
http://forumsarchive.presonus.com/posts/list/45541.page
It has been in Studio One since 2.6.0
Any ASIO 2.0 DM interfaces works with the Zero latency Cue "Z"
 
Forum Index » Profile for jpettit » Messages posted by jpettit