Joined: 22/01/2011 21:44:51
Messages: 3
Location: Phoenix AZ
Offline
The control panel for my FS2626 started crashing every time I click on the outputs tab and also the hardware settings tab , I can click any other tab with out any crashes .
How do I uninstall every bit of the FS2626 driver ? I have tried to reinstall but I think parts of the old driver are still on the computer .
Thanks ...
I'm using a MACPRO OSX 10.6.6 2.8 ghz quad core
FS driver 3.5.2.8028
Mike...
Tallest guy in the Mod Squad with all his hair still on his head.
No I'm not a freaking pilot!! The Air Force won't let me have a suit with a zipper...or sometimes shoestrings.
My advice and suggestions should never be considered advice or suggestions. These are mostly insane ramblings of a poor aircraft mechanic who can, strangely enough, still hear.
StudioLive 16.4.2, AudioBox 1818VSL, AudioBox 44VSL, Faderport, Digimax FS,, M-Audio Firewire 410
--MultiBoot System--
Win Vista 64/XP Pro/7 x86/7 x64 - Mac OSX Snow Leopard/Lion
Gigabyte motherboard--SYBA TI Firewire XIO2200A--i7 2600k Quad Core--16 GB DDR III--Custom 2U Rackmount--4 TB Raid (all internal SATA II)--19" Samsung HDMI LCD on pivoting VESA 1U Mount
Studio One v1 Pro x64
Studio One v1 Artist
Studio One v2 Artist
So this just started happening out of the blue ? Did you make any system changes recently ? or add any new devices ? I run PC so i have no experience with Mac. If i come accross any info ill glady pass it along.
Win 7 pro 64
EP45-UD3P
Core 2 Quad Q9650 (3.6GHz)
8GiGs DDR2 1066MHz
9500GT Nvidia
2 X 20" Acer Monitors
2 X 500GiG WD Black
1 X 1TB WD Black
Plextor PX-880SA 24x
FireWire 400/800
FireStudio Project
HS80M Powered Monitors
BOSS GT8, BOSS GT10
Sonar 8.5 Producer
M-Audio ProKeys 88
Jackson,Gibson,Fender,Ibenez,Yamaha
Win 7 Pro 64
X58A-UD3R
i7 950 (3.06GHz)
12GiGs DDR3 1600MHz
ATI Radeon HD 5750
22" LG Monitor
1 X 64GB SSD
2 X 1TB WD Black
Newest version of UC shows some bug both on OSX and Windows.
On windows, just a problem with show some letters so it's no matter to use on Windows.
but it has some important problem that can't access to mix page on Macbook,
or play some different setting with mix page shows before make change at first time launch on iMac. (not for every Mac)
I had the same problem with mac pro (10.6.8.): Outputs/router and Hardware settings worked fine but the Mixer panel crashed the whole Universal control. Firmware was up to date and UC was the latest version from the Presonus site.
BUT then I installed the OLDER version of UC (1.0) and it works fine!
Why there is no older version of drivers/UC available in the Presonus website?
I have imac 2010-01 ,OSX 10.6.8 , 8Gb Ram, 2TB HDD, protools 9,
I use a cable that 800FW to 400FW the imac has a 800FW and the SL 16.4.2 has a400 FW
and I don't use an adaptor or any thing else.
it was working before the new update !!! and on the ether hand I try to flush it with old VSL 1.1.1 but once I link it to my other windows XP system, it get extremely slow and I ant touch the setting menu. the board is dead !!!!
I use a cable that 800FW to 400FW the imac has a 800FW and the SL 16.4.2 has a400 FW
and I don't use an adaptor or any thing else.
it was working before the new update !!! and on the ether hand I try to flush it with old VSL 1.1.1 but once I link it to my other windows XP system, it get extremely slow and I ant touch the setting menu. the board is dead !!!!
Jammemader,
Please keep UC 1.5 discussion in the forums created for that purpose. Otherwise you'll confuse other folks' issues!