image description


Can't get multi-track output
  Forum Index » Studio One General Discussion 
Author
Message
robertgoldberg
Prenoob

Joined: 14/12/2013 19:35:50
Messages: 4
Offline

I have Studio One V2 Professional running on a laptop. I have a Behringer X32 connected via USB. I have read everything I can possibly find to read and still can't multitrack output back to the X32 from Studio One. All I can get is the two track MAIN output from Studio One.

On the X32 I have the channel sources set to CARD sources. In Studio One I have the output channels set to the individual channels on the X32 (as subs of MAIN, which appears to be the only way I can do it).

I have tried deleting the MAIN output in Studio One but apparently I am not allowed to do that.
I have reloaded the Behringer USB driver to make sure I have the latest.
I have made sure that my copy of Studio One is activated.

This is so frustrating. Can someone please help me understand why I can't get a setup that I can use for virtual sound check working?

Thanks ............. Rob
cristofe
Presonificator
[Avatar]

Joined: 12/03/2012 21:10:44
Messages: 3628
Location: Skaneateles, NY USA
Offline

Sounds like a question for the Behringer forums.

PC'S: HP XW6000 Dual 3.2GHz Intel Xeon Processors, 8GB RAM WinXP SP2
HP 6005 Pro AMD Athalon X2 B24 3.0Ghz Processor, 4GB RAM Win8 Pro
HP Compaq NC6320 Laptop Intel Core2Duo 2.0Ghz Processor 3GB RAM Win7 Ult
Dell Latitude E4310 Laptop Intel i5 2.67Ghz Processor 4GB RAM Win7 Pro x32

Audio Interfaces: Terratec EWS88MT PCI (2), Audiobox 1818VSL USB & FP10 Firewire, Steinberg MI4 USB, Line 6 Toneport GX & PodXT, Roland GS-10, NI Rig Kontrol 3

Monitors: Yamaha HS50M's

DAWS/VST Hosts: S1 Professional, Plogue Bidule, Xlutop Chainer, Sieb VSTHost & Savihost

Hardware Synthesizers: Roland SH-32 & XV-3080 RedSound Darkstar XP2, Novation X-Station, Yamaha AN200, M-Audio Venom

Hardware Controllers: JL Cooper CS-10 Control Surface, Yamaha EZ-EG, Dillion Les Paul style acoustic electric guitar with Roland GK-3 pickup and GI-20 converter.

The Rest: Guitars, Amps, Stompboxes, Mics, Outboard Gear, VST plugins...too much to list!
[WWW]
mrpicholas
Presonic
[Avatar]

Joined: 27/04/2011 03:06:14
Messages: 284
Location: California
Offline

Have you created outputs in Studio One's I/O page. I don't have S1 in front of me, but it's the top left corner of the mixer. The default is Main Out and Sub Out, and you need to "Add Stereo" or "Add Mono" as many times as you have outputs, and then route to the various outs as they are available. Let me know if this doesn't make sense and I'll send you more detailed info when I get home (or someone else can).

I don't use the Behringer, but I had to create and route to all of the outs on my Firestudio Projects.

MacBook 2.1 GHz Intel Core 2 Duo with 4GB RAM & OS 10.6.8. Studio One Professional 2.6, Notion 4, 2x PreSonus Firestudio Project Interfaces, PreSonus ACP88, PreSonus Sceptre S6, FaderPort, Melodyne Editor 2.1.2, Waves Gold Bundle 9.0, Nomad Factory Integral Studio Pack, Native Instruments Kore 2 & Komplete 6, AAS String Studio & Ultra-Analog VA2. Faber-Castell #2 Pencil
robertgoldberg
Prenoob

Joined: 14/12/2013 19:35:50
Messages: 4
Offline

A Sweetwater Tech Support rep solved my problem. I had all the sub outputs defined but I didn't have any tracks routed to the sub outputs. everything was routed to the MAIN output. So now I'm good to go (other than having to change every song I did by hand since the template I used was not set up right).

Thanks to all for trying to help.

Rob
Kiwicomposer
Presonic
[Avatar]

Joined: 02/12/2011 15:38:39
Messages: 284
Location: Wellington, New Zealand
Offline

I assume now you have created a template with the correct setup so that starting a song is easier in the future!

If so maybe you can load it up on the Studio One Exchange for other X32 Users?
That would be really helpful to some!
Steve Currington
de Composer
Wellington, New Zealand
Twitter: @kiwicomposer
Facebook: kiwicomposer
SkypeID: kiwicomposer
----------------------------------------

Primary Hardware: Presonus Studio One v2.6.2, Presonus Audiobox1818vsl, Presonus Audiobox USB, Presonus Faderport, Focusrite Liquid Saffire 56, MOTU Traveler Mk3, TC-Helicon VoiceworksPlus, FMR RNC, FMR RNLA, Axiom Pro 49 Keyboard, other sundry hardware, numerous mics, audio plugins and instruments.
Primary Software: Sibelius v7.x, Notion v4.x, Logic Studio. V9.x., Melodyne Editor.

Running on iMac's and MacBookAir with OSX 10.9.x Mavericks

roblof
Presonoid
[Avatar]

Joined: 12/04/2011 21:33:08
Messages: 1297
Location: Sweden
Offline

Kiwicomposer wrote:I assume now you have created a template with the correct setup so that starting a song is easier in the future!

If so maybe you can load it up on the Studio One Exchange for other X32 Users?
That would be really helpful to some!

No need for a new template. Just use the sl32.4.2ai template. Works like a charm...
Behringer x32 with Dante, x32-rack, s16 stagebox, p16 monitor system, StudioLive 24, FirePod 10, Alesis HD24, M-Audio FastTrack Pro, Studio One Pro v2, NI Komplete 5-8 Ultimate, Cubase 4, Ableton Live 8 Suite, Reaper 4, misc Line6 gear/software, True Temperament Frets on basses and guitars, Korg Kronos, Roland vk-7, Yamaha 02r.....
hibidy
Presonoid

Joined: 01/02/2011 09:13:29
Messages: 2320
Offline

robertgoldberg wrote:A Sweetwater Tech Support rep solved my problem. I had all the sub outputs defined but I didn't have any tracks routed to the sub outputs. everything was routed to the MAIN output. So now I'm good to go (other than having to change every song I did by hand since the template I used was not set up right).

Thanks to all for trying to help.

Rob


Sweetwater is one the rulers of the universe. Glad you got it sorted!
New computer:

2.6.2/win7x64 ultimate/SSD os and library/i7 4770/16GB ram

Focusrite saffire 14/Novation impulse 49/tons of VST goodies

 
Forum Index » Studio One General Discussion
Go to: