image description


Aux Outs to Headphone amp??
  Forum Index » 24.4.2 
Author
Message
steverobert
Prenoob

Joined: 05/12/2013 20:05:06
Messages: 23
Offline

When I send the mono (right?) output of an aux out on my SL 24 - via a TRS 1/4" cable - and INTO the aux IN on a channel of my "new" Rolls Headphone amp (which is a "stereo" input ) - I only get sound in my LEFT ear. Is there anything that can be done about this? I would like the (still mono) send - but into both ears?
SwitchBack
Presonoid
[Avatar]

Joined: 17/02/2011 01:10:03
Messages: 1428
Offline

Unless your hp amp has a (mono) switch for this, you'll need an adapter cable: ts jack on one end and a trs jack on the other end, tip and ring connected to the tip of the ts plug.
steverobert
Prenoob

Joined: 05/12/2013 20:05:06
Messages: 23
Offline

With the TS side going into the HP AMP?

By the way - thank you very much.
SwitchBack
Presonoid
[Avatar]

Joined: 17/02/2011 01:10:03
Messages: 1428
Offline

TS in the mixer, TRS in the HP amp
Monoskier
Presonic
[Avatar]

Joined: 24/02/2012 09:17:18
Messages: 185
Location: Denver
Offline

Another option is to just use TS to TS and move the jumper on the rolls unit to mono. You'll need some tweasers to do so. It's in the rolls manual.
steverobert
Prenoob

Joined: 05/12/2013 20:05:06
Messages: 23
Offline

I do not see anything about a jumper in the Rolls manual.

This message was edited 1 time. Last update was at 25/06/2014 12:15:58

rpark
Presonic
[Avatar]

Joined: 30/07/2011 07:12:57
Messages: 275
Location: Lake Jackson, Texas
Offline

On some Rolls amps, sending a TS connection will put the signal into the left and right as mono. Not sure the model you are using.
Presonus StudioLive 24.4.2
Presonus Studiolive 16.4.2 Ai
328Ai & 318SAi Speakers
Macbook Pro 15 3.06, Airport Extreme Multiband, iPad G1
Five-0 Music
The Intercoastal Pirates
[WWW] [Yahoo!] aim icon [MSN] [ICQ]
steverobert
Prenoob

Joined: 05/12/2013 20:05:06
Messages: 23
Offline

OK - problem solved.

Musicians Friend Sent an ART headphone Amp - it can take the mono output of the SL board and make it mono- in BOTH ears.

Thank you everyone for your ideas.
 
Forum Index » 24.4.2
Go to: