image description


How to copy A/B EQ & DYN Settings
  Forum Index » 32.4.2AI 
Author
Message
carlosplazavegas
Prenoob

Joined: 26/04/2014 17:05:19
Messages: 2
Offline

Hi. I purchased my 24.4.2 AI a couple of days ago and getting acquainted with this wonderful mixer. I can't find in the manual how to override the settings of the FAT Channel if you decide that the alternate settings are better than the original. Is there a way to transfer the settings or I need to keep the Alt button on? Thanks.
andguent
Prenoob
[Avatar]

Joined: 22/02/2013 06:54:29
Messages: 98
Location: Philadelphia, PA
Offline

As an FYI, there is a section of the forums specific to 24.4.2AI boards. The 32 and 24 channel boards are similar though.

You have a couple options, especially if you have a computer connected with Universal Control/Virtual StudioLive installed.

I would check the owners manual, specifically sections 4.1.8 Saving Fat Channel Presets and then 4.1.7 Loading Fat Channel Presets. You should have fifty channel preset slots that are open after the built in presets. If you save your B channel into one of those slots, and then load it back in on top of the A that should take care of it.

If you can, I would highly recommend installing Universal Control/Virtual StudioLive installed on a computer. They are often referred to as just "VSL". This gives you immense archival and restore options. You can save an entire board scene to a text file on a laptop and keep it around for years.

Whatever you decide to do, please do a scene save to a scene slot every once and a while. This can save you a lot of headaches later if you want to revert most of the board back to what you had set prior.
Church gear: SL 32.4.2AI, MacBook Pro 13" 2.5Ghz i5, iPad 2, 4x Sennheiser ew100 G3, 3x Yamaha SM12V wedges, crummy main speakers
carlosplazavegas
Prenoob

Joined: 26/04/2014 17:05:19
Messages: 2
Offline

Cristal clear. Thank you very much!.
 
Forum Index » 32.4.2AI
Go to: