image description


Connection to imac ... ( works well on PC )
  Forum Index » StudioLive Forum Community Support 
Author
Message
JDR
Prenoob

Joined: 25/09/2011 23:56:56
Messages: 52
Offline

For some reason I get the below when connected to my iMac. The UC seems to work (move a knob, it shows, and vice versa), but NO SOUND.

Any ideas?
Screen Shot 2013-10-08 at 7.39.25 AM.png
[Thumb - Screen Shot 2013-10-08 at 7.39.25 AM.png]
 Description [Disk] Download
 Filesize 42 Kbytes
 Downloaded:  249 time(s)

JDR
Prenoob

Joined: 25/09/2011 23:56:56
Messages: 52
Offline

Never Mind .. I was being stupid.

Capture Options: Presonus ...

Working fine.
Miltondavis
Presonic

Joined: 27/01/2011 20:23:03
Messages: 225
Location: Arroyo Grande, CA
Offline

Have you done the "change the firewire ID from 0 to 1 and back again" fix? This can be done from the console's system menu.

Regards,
Milton Davis
[WWW]
Miltondavis
Presonic

Joined: 27/01/2011 20:23:03
Messages: 225
Location: Arroyo Grande, CA
Offline

Oops, mails crossed in the Ether. Glad to hear it's working.

[WWW]
mseire86@gmail.com
Prenoob

Joined: 06/12/2013 01:12:00
Messages: 4
Offline

Hello. I am having this same issue. Can you explain how to fix this?
JDR
Prenoob

Joined: 25/09/2011 23:56:56
Messages: 52
Offline

Capture Options: Presonus ...
mseire86@gmail.com
Prenoob

Joined: 06/12/2013 01:12:00
Messages: 4
Offline

Sorry to seem stupid, but where do I find that? I'm looking through the Presonus settings and I don't see it. I'm also in the audio settings on my Mac. After updating to OSX Mavericks I can no longer control the input/output. I've updated to the latest drivers and software provided here.

This message was edited 1 time. Last update was at 06/12/2013 01:21:14

JDR
Prenoob

Joined: 25/09/2011 23:56:56
Messages: 52
Offline

IIRC, Studio One, Setup
mseire86@gmail.com
Prenoob

Joined: 06/12/2013 01:12:00
Messages: 4
Offline

Okay let me start from the beginning. I must be missing something.

Installed latest StudiLive 16.0.2 drivers
Connected device
Installed Universal Control
Installed Studio One

I can control my board using UC and it says that my board is present. But mac says "The selected device has no output controls"

What did I miss? What is IIRC?
JDR
Prenoob

Joined: 25/09/2011 23:56:56
Messages: 52
Offline

IIRC ,,, If I Recall Correctly.

... beyond that, I'm not sure ...
GLJones
Presonic
[Avatar]

Joined: 27/11/2011 18:11:25
Messages: 712
Location: Orlando, Florida
Offline

OK...on the home page of Capture at the bottom center you can select the input to use for audio. Make sure yours is set to FireStudio and it should work.

Jerry Jones

On the road:
PreSonus StudioLive 24.4.2 or 16.0.2
MacBook Pro 15"
iPad
iPhone
QSC K12s
QSC KW-Sub
Sennheiser G3 Wireless Instrument Systems (6)
Sennheiser G3 Wireless Monitor Systems (6)
Studio One 2 Professional

In the Studio:
PreSonus StudioLive 24.4.2 or 16.0.2
Mac Mini
Studio One 2 Professional
Logic Pro 9
Yamaha HS80M Studio Monitors
JBL Sub
Samson C-QUE-8 Headphone Amp

Violectric.net
FretlessRock.com
[WWW] aim icon
mseire86@gmail.com
Prenoob

Joined: 06/12/2013 01:12:00
Messages: 4
Offline

Okay. Gotcha. It is set to my Presonus. It's the same thing for me in Logic. Everything is set to use My StudioLive board for input/output. But the only way I get any audio out/in is using the built in setting.
GLJones
Presonic
[Avatar]

Joined: 27/11/2011 18:11:25
Messages: 712
Location: Orlando, Florida
Offline

Just to clarify, when you say no audio, what is the source? Are you trying to play from iTunes or YouTube or audio from the interface to the computer or from Capture (or StudioOne) to the board?

If you are trying to play iTunes or some other source to the board, you have to play with Audio MIDI setup (comes with OSX)

Go to the Audio interface and select the Presonus Device. Then select OUTPUT and SPEAKER CONFIG.

Make sure the STEREO (button) setting is set to your firewire channels properly (usually 17 & 18 on the SL16 and 25 & 26 on the SL24)

Then, and this is where the problem lies, go to the MULTICHANNEL (button) and change the drop-down to one of these two options. One works for some things and the other for other things...real PITA:

Option 1 : Select STEREO from the drop-down and set channels to the same as the setting in the STEREO tab (or button).

Option 2 : Select QUADRAPHONIC and make sure the channels are set to anything BUT the two in the STEREO tab (or button)

I find that iTunes requires it to be set to option 1 and Safari (web) requires option 2. I just leave Audio MIDI Setup open so I can change it when needed. This is an APPLE issue that was introduced in Mountain Lion and still exists in Mavericks. Hope they fix it soon.

I hope this helps but if not, keep posting till we get to the bottom of your issue.
Jerry Jones

On the road:
PreSonus StudioLive 24.4.2 or 16.0.2
MacBook Pro 15"
iPad
iPhone
QSC K12s
QSC KW-Sub
Sennheiser G3 Wireless Instrument Systems (6)
Sennheiser G3 Wireless Monitor Systems (6)
Studio One 2 Professional

In the Studio:
PreSonus StudioLive 24.4.2 or 16.0.2
Mac Mini
Studio One 2 Professional
Logic Pro 9
Yamaha HS80M Studio Monitors
JBL Sub
Samson C-QUE-8 Headphone Amp

Violectric.net
FretlessRock.com
[WWW] aim icon
 
Forum Index » StudioLive Forum Community Support
Go to: