image description


GEQ questions...
  Forum Index » 24.4.2 
Author
Message
CHIP ROBERTS
Prenoob

Joined: 09/08/2011 07:20:38
Messages: 22
Offline

I picked up a StudioLive 24.4.2 today. I've read page 58 (GEQ's) over and over and I just don't understand how to insert them where I want them. HELP!

I want GEQ #1 on aux 1
GEQ #2 on aux 2
GEQ #3 on aux 3
GEQ #4 on aux 4
GEQ #5 on aux 5
GEQ #6 on aux 6
GEQ #7 on "MAIN MIX L
and GEQ #8 on MAIN MIX R.

What exactly do I need to do?

Also, how do I "link" GEQ's 7 & 8 so I don't have to adjust both of them individually?

Thanks everybody.
puehringery
Prenoob

Joined: 25/02/2011 15:41:26
Messages: 25
Offline

hi!
Press "GEQ" Button
With the"prev / next" buttons go to "assign" and then choose with the "value" knob on wich Aux or Main Out GEQ 1 should be assigned.
With the Button "PG Down" you can go to GEQ 2 and so on
Linking 2 EQ is not possible. (Only in VSL the 2 GEQs assigned to the Main Out are linked)
The only way on the Board itself is to set (in your case) GEQ 7 first, then go to GEQ 8 and press "recall" all the settings from GEQ 7 would be copied to GEQ8
This works with the other GEQs as well.

Hope I could help you....

regards
robare99
Presonic
[Avatar]
Joined: 16/05/2011 18:25:55
Messages: 725
Offline

puehringery wrote:hi!
Press "GEQ" Button
With the"prev / next" buttons go to "assign" and then choose with the "value" knob on wich Aux or Main Out GEQ 1 should be assigned.
With the Button "PG Down" you can go to GEQ 2 and so on
Linking 2 EQ is not possible. (Only in VSL the 2 GEQs assigned to the Main Out are linked)
The only way on the Board itself is to set (in your case) GEQ 7 first, then go to GEQ 8 and press "recall" all the settings from GEQ 7 would be copied to GEQ8
This works with the other GEQs as well.

Hope I could help you....

regards


It would be nice if the GEQ's were all individual, and could be inserted onto different channels...
 
Forum Index » 24.4.2
Go to: