Messages posted by PhilG

line 6 did that with their new mixer and it is terrible.

I would love the next gen to jsut have some simple things like recallable gain / aux out levels and a different interface to replace FW

nice got #3 in the votes

probably a configuration error, when you say " I LOOSE ALL SOUND!" that is a good thing it means that the device is detected and attempting to route sound outputs via the audio box and not through whatever you were listening to before

you didnt really provide information on what you have plugged in where, what operating system you are using, if you are monitoring via the audiobox or another interface - you need to be a lot clearer instead of just complaining if you want people to help you out

OS?

Does the driver control panel open?

Is the device listed in core audio / device manager ?

you need to change the buffer settings for lower latency

would love S1 to win

weird I must do further testing then

I am usually a windows guy but i took my 2009 mbp out for a spin this weekend as my other rig was in use somewhere else. I recorded as usual using a belkin 800 to 400 cable that i know is good. Performers complained to me after abo. ut 15 minutes the in ear. mixers were clicking i ended up having to disconnect the mac and problem went away. Last night i did further testing with the mac. Turns out i have to run in safe mode 1 or 2 to stop the glitching it is noticeable in the audio recordings as a rubber banding effect. The mac is a decent spec i7 2.7ghz 8gb ram with 480gb ssd it has no problems running with audiobox or pod500hd and no other software was running

Macos 10.7.4
Studio one 2.0.7

Sorry about grammar lol i typed this on my phone, i wish this forum had phone support!!

ram is cheap, just upgrade

- less than $6 per Gb at most decent places now

in 4 years of mixing and over 1500 gigs with the SL 16's only 2 of the venues have had a FOH mixing position

ill stick with the ipad

have you disable UAC and any anti virus scanners? I have had no problems with the latest driver

Just buy a second hand ipad1 cheap as chips and works perfectly fine

I always use aux subs clears up the mix without having to do bucket loads of processing

works well with any PC that has correct firewire chipset in it

I also doubt the ipads flash memory being able to handle 18 tracks of raw audio at once