image description


Forum Index » Profile for danielzamorano1 » Messages posted by danielzamorano1
Author
Message
Digital Audio Recording » mwrong » Go to message
Yea I was trying to be funny, but in a way where it wouldn't be minded so much, more of an attention grabber really. All friends for sure.

Have a great week. Save up for the ADL600, it's worth every penny!
Digital Audio Recording » mwrong » Go to message
I totally understand, got to make the money.
Digital Audio Recording » mwrong » Go to message
10-4, can dig it.

yea my ADL was registered before I started requesting help, and did create a ticket, unfortunately Presonus wanted my to ship the unit in, but I can't afford down time, and it's my only frontend pre, and the album I'm working on I need to fix myself to correct the jumpers myself.



I guess, well I'm assuming, Presonus wants to charge a fee?, but for a few on gearslutz they provided a schematic to DYI. Here's the link you sent.

Presonus says they can't help, which is a contradiction on helping others, but I totally understand if they want to charge, but their reply is that they don't have the schematic to DYI.

Here's the help they gave Steve, on his reply below.

Originally Posted by SteveE9C6 View Post
The first production run had a incorrectly set of jumpers and possibly something else. Basically, the listed impedance settings were incorrect and no one noticed. Craig Anderton did a glowing review of the unit but did note this issue. Truthfully, I used the unit for over three years before I sent it back to have this corrected. It still sounded wonderful.

The folks at Presonus were extremely helpful and responsive. I did not actually "have" to send it back. They were happy to send me schematics and directions on how to do the fix. However, I am visually impaired and working on anything like that is challenging to say the least. I sent the unit to them and had it back in under two weeks.

I am still using the original tubes it shipped with and am quite happy with it. The only thing better I can imagine would be a 8 channel unit built to the same specs.

Glad to pay the same fee, and they send the schematics so I can keep rolling.
Digital Audio Recording » mwrong » Go to message
Please forgive me also, and thanks.

Yea even on the DUC forum, even us veterans find it difficult to search for stuff and only to post something that has already posted to death, but no luck finding, thus, get bashed (LOL)

Have a great week everyone.
Digital Audio Recording » mwrong » Go to message
Read the post?, was very polite, although I did have to have fun with the mwrong (mwright). No pund intended. Just making a point.

Of all the forum's I'm a member, your the first one who has never helped being an admin, I clearly read rules and sometimes even the best of us make mistakes and admin's are really helpful(OR), polite enough to move the post to the proper post forum. Well I searched and the oops message popped up, no one informed it was a bug until you just informed me. Would have great if I was informed that the last post where you clearly stated ( CONSIDER THIS A WARNING)

I would never call anyone a MORON, or elude to that, just simply wrong Mr. Wright.

Anyway how can I completely remove my account from this site?, sure appreciate it.



Digital Audio Recording » mwrong » Go to message
Hey I was able to have bigtree help me out the ADL600 issue, and since I can now proceed tomorrow with my frontend. KSM32 pair> ADL 600 which is an incredible frontend.
I will call Presonus tomorrow, even though I have made a mistake on posting on the wrong page, nonetheless the the unprofessional ism will be known, and to threaten people constantly is unacceptable mwrong187
All Other PreSonus Hardware » ADL 600 IMPEDINACE FIX » Go to message
Hi folks,

OK after posting three times in the incorrect forum, and I didn't realize i wasn't in the right forum post. But only to get a unprofessional notice saying statement below.


***Oooops. You don't have sufficient privileges to access this message***

This is the first time in any forum or company not be helpful, only with the comment above, and I did my best to try to find the right forum page to get help so I wasn't trying to waste resources for anyone.

In any case is there anyone who has the diagram to reset the jumpers to correct the impedance issue on the early ADL 600

Please forgive if I still didn't post it in the correct page mwrong137.



All Other PreSonus Hardware » Rediculous !!! ADL 600 impediance fix » Go to message
Someone sent me a message regarding the previous post (ADL 600 Impedance fix) and Presonus decided to block me from seeing the message

(WHAT), HOW PROFESSIONAL IS THAT!

Here's the message I get below

***Oooops. You don't have sufficient privileges to access this message***

I'll never buy another Presonus product again!
All Other PreSonus Hardware » ADL 600 impediance fix » Go to message
Anyone can help me please, my ADL600 happens to be the early ones with the impedance issue and I need the DYI diagram to set the correct jumpers, it's the only pre I have and I can't afford down time and send it in, thanks.
Digital Audio Recording » PreSonus LIVE Airs Thursday! See and hear Rick's Monster ADL 600 / ADL 700 rack in action, LIVE! » Go to message
Anyone can help me please, my ADL600 happens to be the early ones with the impedance issue and I need the DYI diagram to set the correct jumpers, it's the only pre I have and I can't afford down time and send it in, thanks.
All Other PreSonus Hardware » ADL 600 IMPEDIANCE » Go to message
lhansen wrote:Dan,

I just purchased mine (new) about a month ago, ( S/N AD6C13030015) so I'm sure it's not an early run. I don't even know if they're in production anymore?

Anyways, I have the hard printed manual in front of me and the only schematic/diagram is basically a block diagram showing the signal path, nothing down to component level.

I would suggest contacting Presonus directly and see if they have something in a PDF format that they can email you?

BTW..I love my ADL600!

Larry

Hi Larry thanks for chiming in, I all my documentation, I just need the DYI to set the jumpers, one cat at gearslutz. com said they set him the DYI diagram but he longer has anymore, so I keep looking.

That's the only pre I have and I can't afford to have down time and I need to do it myself.
All Other PreSonus Hardware » ADL 600 IMPEDIANCE » Go to message
Ihasen thank you for chiming in on the subject. Last resort I'll send it in, but for now I'm waiting for a cat on gearslutz.com to send me the schematics that Presonus sent him a while back. It's a simple DIY is what he told me. Hopefully I can get this done soon.

MANY THANKS
All Other PreSonus Hardware » ADL 600 IMPEDIANCE » Go to message
Hi all , happy to be on board, after all these years owning Presonus gear. I recently found out my ADL 600 was one of the first production run units with the incorrect jumper setting, I can't afford no down time to send it in and was wondering if anyone here has schematics to do a DIY

THANKS
 
Forum Index » Profile for danielzamorano1 » Messages posted by danielzamorano1