image description


Forum Index » Profile for daveblue222 » Messages posted by daveblue222
Author
Message
FireStudio Mobile & FireStudio Project » art pro I/O button » Go to message
Hey all


should i have the button on my art pro mpa pressed in (+4dbu) or out (-10dbv)

i am running xlr to trs jacks from the preamp to a firestudio project interface.

not sure what what the ideal setting should be...?

cheers


Dave
FireStudio Mobile & FireStudio Project » External preamp with firestudio project » Go to message
thanks for the reply. i understand most of what you mentioned but what i still can't work out is why the gain knob still affects signal level when it is meant to bypass the project pres..


?

regards
FireStudio Mobile & FireStudio Project » External preamp with firestudio project » Go to message
Hi all

What is the best way to hook up an external preamp to the project? I have read numerous threads regarding this subject. Many folks say that there is no way to truely bypass the presonus preamps. The manual states however that plugging a trs cable into the front inputs on the unit (firestudio) completely bypasses the preamp. this doesnt seem to be the case as the gain knob still affects the level etc... others say its best to go into the return inputs on the rear of the unit for either channel 1 or 2, again the gain knobs on the front still affect signal.

Basically I just want to know the best way to hook this stuff up. at the moment i am using the rear trs input for channel 1, with the gain on the firestudio turned up halfway.

any help would be greatly appraciated


dave
 
Forum Index » Profile for daveblue222 » Messages posted by daveblue222