image description


Forum Index » Profile for jacobthomas » Messages posted by jacobthomas
Author
Message
16.4.2 » our church 16.4.2 is locking » Go to message
talmen wrote:Does it happen routinely? What brings that condition about -- is there a certain sequence of steps (power-up/connection) that cause it to happen reliably or does it seem to be happening unexpectedly/randomly? Is this connected to a computer or stand-alone operation? If connected, have you checked the FW cable? Have you tried toggling the FW ID? (That solves some apparent lockouts that result from unstable or dropped FW connections.) Have you tried upgrading or re-flashing the firmware? The more information about your situation you can include, the easier it is to help you, too. Suggest you get your system specs into your signature so that people can be more effective in helping you.

it just happened
stand alone there is no computer connect to it.
16.4.2 » our church 16.4.2 is locking » Go to message
fredy2 wrote:Can't tell a thing from the photo other than you have chan #1 selected which that blue selection button is outside what you have focus of.

It appears that you might have the gate showing full gain reduction for channel #1. You photo is drastically over exposed and the display cannot be read.

What exactly do you mean by "locking?"

One thing you might try as a longshot is to make sure your speaker amps or powered speakers are off when you power up the mixer.
This is a long shot, but I have seen some digital devices fail to RESET at startup due to slight currents coming from external devices back driving the electronics.


well all channels having same issue I was trying all of them but it still same thing

I mean by locking it's just lock and it doesn't work there is a power as you see in the picture but there is no signal coming in or out. kind of freezing
16.4.2 » our church 16.4.2 is locking » Go to message
hello every one ..
our 16.4.2 is locking... tomorrow is Sunday and we have service

I don't know what to do

please any idea !! any help ?

I took this picture ( attached ) to show you what's going on
House of Worship » No sound to the stage moniters » Go to message
hello everybody !!

this is my first question

in our church we have changed the stage moniters we got couple of EV powered moniters
but the issue is we not getting sound on them but the moniters are working fine we have test them
but I guess there is a problem with the connections,And the connection are same how it was with the pervious moniters and they were working ! I read the user manuel but it didn't help
so please is there anybody can help me ?
 
Forum Index » Profile for jacobthomas » Messages posted by jacobthomas