Messages posted by martin.jirsak

That's really strange. What version of Studio One do you have, please? I tested it on Studio One 2.5 and 2.6. If you open the Editor, select One MIDI Note in the editor, and Apply the Macro, it should works for this One Note only, even if there are other MIDI Notes in the MIDI region.

Hi Macwriter, could you send me screenshot before apply the macro, and after it, please? Or try to use QuickTime screenrecording, and record whole process, please.

I tested it again, and it wors, as expected, even if you use overlap of notes. Even if you have more notes in the track, etc.

Thanks!

Can Studio One see any incoming MIDI data from the Yamaha keyboard in the MIDI Monitor window of the Studio One?

You can import MP3 file too. Can you try this? Is it the noise here too?

You have to record these data as audio. So, record data to the track, which you are using for monitor it.

Or use real-time Mixdown.

Is this issue with any specific virtual instrument only? Or is it the same for all instruments?

Are you using Melodyne by click to "Edit by Melodyne" or as ReWire?

Is your Studio One up-to-date? Is your Melodyne up-to-date?

What are you recording from the HW sequencer? MIDI or audio? Is this "echo" audiable after recording too? Or is it just during the recording?

What about your sync Setup?

Melodyne works as plug-in, in fact. This is the reason, if you switch it off, the sound is back, as it was before the editing in the Melodyne.

Michael1985 wrote:Yes, if I delete a MIDI note, it is still played. sometimes it happens. not just with kirnu. when it happens I dont know.

Sounds strange... Did you try to move the event to different track, and listen to it? Just to be sure, there is (or is not) the MIDI note? Are you sure, you are using one layer only?

Could you send me (just for testing, and my own insterest) any of the project, where is this problem, please? Can you mark me, where is this problematic MIDI note (like write me down, on which track the MIDI note sounding)?

I'm afraid, this is problem of particular plug-ins. Try to update all of your plug-ins, please.

However, try to check your settings in the Options > Advanced > MIDI.

Try to activate "Cut long notes at part end", and/or Chase long notes. This could help.

Hello Roy,

What version of Studio One do you have, now? I'm afraid, upgrade to the Studio One 2 Pro will not fix this (if you have Free or Artist or Producer version of Studio One 2). It looks like incompatibility with this sound card because of any reason. :-/

Can you try to use Agregate device of Mac OS X, and use this sound card in the aggregate device? You will bypass an internal driver of the sound card. This could works.

Hello, and welcome.

Can you double check your Audio Setup from Options? Check your Device Block Size (Buffer Size) is large enough. Try to increase it. You can check the Performance in the Transport bar (on the left side, there is Performance bar).

I suppose, you are using PreSonus USB ASIO driver, am I right?

Michael1985 wrote:one more:

kirnu arpeggiator should work proper! BUT not only kirnu, often some midi notes arent replayed as expected.

Could you be more specific, please? I don't have this problem. I have had problem with EastWest Play engine. Some notes didn't played, but this was problem of the EastWest Play engine (I tested it on different DAWs, it was exactly the same).