image description


The Version 2.5 bugs thread
  Forum Index » Studio One General Discussion 
Author
Message
woodsdenis
Presonic
[Avatar]

Joined: 15/10/2012 00:56:49
Messages: 213
Offline

Daw stew wrote:I've had my attempt at using the Alt+ drag of an effect onto to an event . Its not gone well. I dragged a reverb onto an event. I rendered it and set a reverb tail time. Now only the effected event plays and all events before and after do not. Has anytime else experienced this?


Just tested this, all works ok here
Mac Pro 3.33
Lion 10.7.4

StudioOne Pro 2.6
Protools 10 Native
Logic 9
Ableton Suite 9

HD Native/96 io

Thanks

Denis
woodsdenis
Presonic
[Avatar]

Joined: 15/10/2012 00:56:49
Messages: 213
Offline

When trying to do a Transform/Render all outputs with Kontakt 5 hosted in VEP Pro S1 just looped around the transform process without stopping. Kept repeating the transform of the 4 Kontakt tracks over and over without finishing , Cancelled and did each individually and it worked. Not reproducible

This message was edited 1 time. Last update was at 09/12/2012 02:55:09

Mac Pro 3.33
Lion 10.7.4

StudioOne Pro 2.6
Protools 10 Native
Logic 9
Ableton Suite 9

HD Native/96 io

Thanks

Denis
woodsdenis
Presonic
[Avatar]

Joined: 15/10/2012 00:56:49
Messages: 213
Offline

Crash when dragging and ez Drummer midi file into a track on S1. Noise on outputs, pizza wheel crash. Log attached
Toontrack crash.pdf
 Description [Disk] Download
 Filesize 118 Kbytes
 Downloaded:  351 time(s)

Mac Pro 3.33
Lion 10.7.4

StudioOne Pro 2.6
Protools 10 Native
Logic 9
Ableton Suite 9

HD Native/96 io

Thanks

Denis
czarthp81
Prenoob
[Avatar]

Joined: 16/01/2011 21:37:38
Messages: 46
Location: Nashville
Offline

I've noticed when I take a bus channel with a physical input (input 7-8 for example), and send it to an audio track with the same bus input and physical output, the levels are louder on the bus channel then the audio track. These should be the same volume. Looks to be maybe 6db hotter on the bus channel.
Lynx Aurora 8, Dangerous D-box, Focal CMS65, Empirical Labs EL9 mike-e, JDK audio R24, profire 2626, phoenix Audio nice DI, little devil pre, SSL duende, Chameleon Labs 7720, sonnox oxford elite bundle, waves SSL, mcdsp classic pack, sound toys native bundle, McDsp Retro Pack, McDSP ultimate compressor, waves H-comp, H-delay
[WWW]
crow
Presonic
[Avatar]

Joined: 10/02/2011 04:05:43
Messages: 663
Location: North Carolina
Offline

ok i think i got a bug when i open open air it takes some time and when i try to adjust the settings it takes some time i never had this problem before anybody else have that problem?
LIFE IS A SCHOOL! SO TELL ME WHAT DID YOU LEARN?


tc electronics impact twin, at 4040, Mackie MR5mk2 Reference Monitor, Studio One V2
[WWW]
BoSchafers
Presonic
[Avatar]

Joined: 28/07/2010 17:31:50
Messages: 644
Location: Perth, Western Australia
Offline

Guys, it will help the devs to know what OS you're on as well as machine specs. Please consider putting those in your sig...
MacBook Pro Retina 2.3 i7 8G Latest OSX
UAD Apollo Twin Duo, Axiom 49, KRK Monitors, Rode NT 2 A
Latest: Logic Pro X, Reason, Protools, Studio One Pro
Gibson Les Paul Studio
Fender USA Tele, Strat & Jazz Bass
Martin D15 Acoustic
Roland HD-1 Drums
Kaila Uke
My Soundcloud
Humanity cannot bear very much reality- T.S Eliot
[WWW]
woodsdenis
Presonic
[Avatar]

Joined: 15/10/2012 00:56:49
Messages: 213
Offline

BoSchafers wrote:Guys, it will help the devs to know what OS you're on as well as machine specs. Please consider putting those in your sig...

I would put it more bluntly, if you don't post your specs the software team will just skip over your post. It is totally useless to them or others trying to help.
Mac Pro 3.33
Lion 10.7.4

StudioOne Pro 2.6
Protools 10 Native
Logic 9
Ableton Suite 9

HD Native/96 io

Thanks

Denis
themuzic
Baconator
[Avatar]

Joined: 17/04/2010 05:42:47
Messages: 8703
Location: Wheeling IL (North Chicago Suburbs)
Offline


I can't believe there are so many posts with no system specs. Be advised (as it has already been said) that posts may be skipped over for ones with system specs. I am actually going through every post here and trying to assist people. But I am only addressing those with system specs and an explanation of how to re-create the bug.

http://www.homestudiotrainer.webs.com/
http://www.youtube.com/user/themuzic
Email - homestudiotrainer@yahoo.com
Skype - themuzic
Phone - 773-303-7260
I offer FREE assistance for Studio One (any version) and Presonus hardware, to anyone having issues or anyone who simply wants to learn

Gateway Tower - Intel Core i5 3330 CPU 3GHz 8GB Ram and 64bit Windows 8
[Email] [WWW] [Yahoo!]
PreSonified
Presonic
[Avatar]

Joined: 12/09/2010 03:42:35
Messages: 268
Location: London, United Kingdom
Offline

This is the same for panning Left and Right.

1. A Mono Guitar track (no effects) --> GTR BUS (Ampire using the "Creamy Lead" preset with no delay) and keeping GTR BUS at <C>.

2. Pan the Mono Guitar track right (using the shift key while close to R100 for precise control), it hits 100 and then <R> seems to be a value of 101? (huh?). At <R> Ampire sounds perfect and fully panned to the right as expected.

3. Now, if you pan the Mono Guitar track back so its sitting on R98, etc, the Ampire effect is still heard fine on the right as expected, but the dry Mono Guitar track signal can be heard at the same time. Whereas I was expecting the fully WET sound to be for example R98 / L2

Turning Ampire OFF on the GTR BUS, you only hear audio coming from the proper R98 / L2, etc as expected.

This message was edited 6 times. Last update was at 09/12/2012 07:31:39

Windows 8 64-Bit / Studio One Professional 2.5.1 64-Bit
Intel Quad Q6600 / 8GB RAM / GTX 560 Ti 2GB / MOTU Ultralite (Firewire)
themuzic
Baconator
[Avatar]

Joined: 17/04/2010 05:42:47
Messages: 8703
Location: Wheeling IL (North Chicago Suburbs)
Offline

PreSonified wrote:This is the same for panning Left and Right.

1. A Mono Guitar track (no effects) --> GTR BUS (Ampire using the "Creamy Lead" preset with no delay) and keeping GTR BUS at <C>.

2. Pan the Mono Guitar track right (using the shift key while close to R100 for precise control), it hits 100 and then <R> seems to be a value of 101? (huh?). At <R> Ampire sounds perfect and fully panned to the right as expected.

3. Now, if you pan the Mono Guitar track back so its sitting on R98, etc, the Ampire effect is still heard fine on the right as expected, but the dry Mono Guitar track signal can be heard at the same time. Whereas I was expecting the fully WET sound to be for example R98 / L2

Turning Ampire OFF on the GTR BUS, you only hear audio coming from the proper R98 / L2, etc as expected.


If you are using a single input on a stereo track, this will happen. Make sure that when recording a mono signal, the state of the track is also mono. See the pic below.
stereo tracks recording mono signals.jpg
[Thumb - stereo tracks recording mono signals.jpg]
 Description [Disk] Download
 Filesize 45 Kbytes
 Downloaded:  246 time(s)

This message was edited 1 time. Last update was at 09/12/2012 08:55:23


http://www.homestudiotrainer.webs.com/
http://www.youtube.com/user/themuzic
Email - homestudiotrainer@yahoo.com
Skype - themuzic
Phone - 773-303-7260
I offer FREE assistance for Studio One (any version) and Presonus hardware, to anyone having issues or anyone who simply wants to learn

Gateway Tower - Intel Core i5 3330 CPU 3GHz 8GB Ram and 64bit Windows 8
[Email] [WWW] [Yahoo!]
PreSonified
Presonic
[Avatar]

Joined: 12/09/2010 03:42:35
Messages: 268
Location: London, United Kingdom
Offline

themuzic wrote:If you are using a single input on a stereo track, this will happen. Make sure that when recording a mono signal, the state of the track is also mono. See the pic below.
Thanks for the feedback Johnny. Yep, recorded in mono and I always leave that button at it's original default (mono) as in this case.
Windows 8 64-Bit / Studio One Professional 2.5.1 64-Bit
Intel Quad Q6600 / 8GB RAM / GTX 560 Ti 2GB / MOTU Ultralite (Firewire)
presson
Prenoob

Joined: 02/11/2011 18:07:18
Messages: 22
Offline

Yesterday I installed the 2.5 update and opened my current working project (with 10 'frozen' trax, several instrument trax and various insert fxs). In version 2.0.7 the CPU meter was ~15% stopped and ~25% playing with no major spikes happening. In 2.5 the CPU usage has doubled (~35% stopped and ~60% playing), with severe CPU spikes up to making the sound stutter.

Opened another project (a few instrument trax, no 'frozen' trax); the same behavior: double CPU usage and severe spikes.

I was very happy they finally introduced the 'track to track record' feature, but the CPU issues really make this version unusable for me so I
went back to 2.0.7.

Am I the only one with this problem?

This message was edited 2 times. Last update was at 09/12/2012 10:47:25

C2D E6750 @ 2.66 Ghz, 2Gb RAM, Win7 SP1 x32, RME Fireface UC, Studio One 2 Professional
shadowdancerbnr
Prenoob

Joined: 05/11/2012 20:33:34
Messages: 2
Location: UK
Offline

Having all kinds of problems with 2.5, sadly. Automation simply not working, sluggishness when moving MIDI or regions, even if the song only contains one track with one VSTi on it, regular crashes upon closing (fortunately no data is lost when this happens), certain VSTs apparently crashing the app, instability when using Rewire, a noticeable lack of the "snappiness" I experienced with 2.0.7, much higher CPU usage on very small projects...

Frustratingly, the reason I bought Studio One was precisely for many of the features added in 2.5, so reinstalling 2.0.7 would be pointless. I don't wish to moan as I think it's a fantastic DAW but, in it's current state, I find it unusable. It now feels a little...."broken".

Having sent multiple reports off to Presonus in the past week, I can only hope things get rectified soon enough!

This message was edited 1 time. Last update was at 10/12/2012 00:49:53

Presonus Studio One 2.5, Apple Logic Pro 9.1.8, Ableton Live 8.3.4.
Macbook Pro Retina i7 8GB 2.3 GHz OS X 10.8.2
iMac i5 Quad Core 8GB 2.66 GHz OS X 10.8.2
RME Fireface 800
[WWW]
woodsdenis
Presonic
[Avatar]

Joined: 15/10/2012 00:56:49
Messages: 213
Offline

shadowdancerbnr wrote:Having all kinds of problems with 2.5, sadly. Automation simply not working, sluggishness when moving MIDI or regions, even if the song only contains one track with one VSTi on it, regular crashes upon closing (fortunately no data is lost when this happens), certain VSTs apparently crashing the app, instability when using Rewire, a noticeable lack of the "snappiness" I experienced with 2.0.7, much higher CPU usage on very small projects...

Frustratingly, the reason I bought Studio One was precisely for many of the features added in 2.5, so reinstalling 2.0.7 would be pointless. I don't wish to moan as I think it's a fantastic DAW but, in it's current state, I find it unusable. It now feels a little...."broken".

Having sent multiple reports off to Presonus in the past week, I can only hope things get rectified soon enough!


Having used 2.07 for a couple of months with NO crashes, 2.5 is pretty unusable for me ATM. 2-3 crashes a day is not acceptable for me. Pity because the new features are great, hope they get it sorted soon.
Mac Pro 3.33
Lion 10.7.4

StudioOne Pro 2.6
Protools 10 Native
Logic 9
Ableton Suite 9

HD Native/96 io

Thanks

Denis
donov
Presonic
[Avatar]
Joined: 29/07/2010 10:54:56
Messages: 416
Location: Skopje, Macedonia
Offline

I already submitted a support ticket but as I have not received any reply might as well post it here:

Request #102891
multi out transform bugs

Dec 03 15:20

1. when midi data for all the channels is on one instrument track, when reverting it gives me a totally different VST,
I had Impulse when reverted it had a synth

2. when midi data for kick, snare etc... is on separate instrument tracks it renders the track selected plus all the other channels as muted/silent and it does not give the option to "remove instrument" because I have only one of the tracks selected

if I select all of them it gives me the option to remove instrument, but it renders as above, one channel plus the rest muted multiplied by the number of channels. so for kick snare and hh you get the three tracks plus 6 muted audio tracks

3. if while in transform mode I edit a parameter on a vstFx or add a fx, when I revert to instrument all edits are lost and added vst's removed
i7-920, Asus P6T, 6Gb Corsair, M-Audio 1010Lt
Win 8 Pro 64bit, nVidia GTX560Ti

Presonus S1 Pro 2.5 64bit,
DCAM Synth Squad,
Melodyne Editor 2.1,
Slate Digital VCC,
Softube Mix Bundle

Presonus Blue Tube
AT4040
M-Audio Oxygen 8 v2
 
Forum Index » Studio One General Discussion
Go to: