image description


FireStudio Project "Direct Out" Mode
  Forum Index » FireStudio Mobile & FireStudio Project 
Author
Message
danielhuber
Prenoob
[Avatar]

Joined: 13/08/2010 03:59:28
Messages: 12
Offline

My two FS Project's is coming, and i want to record live shows.

I see in other thread that if i turn off the Universal Control Mixer (disable all 5 mixers) the General purpose outputs ( 1 to 8 ) of the interface will act as "Direct Outputs" from the interface inputs 1 to 8, eg:

In 1 > Out 1
In 2 > Out 2

And so on...

Is this true? Is this i need...

This message was edited 1 time. Last update was at 02/04/2014 07:07:02

cristofe
Presonificator
[Avatar]

Joined: 12/03/2012 21:10:44
Messages: 3628
Location: Skaneateles, NY USA
Offline

The FireStudio Project also includes the FireControl mixer/router a 18x10 DSP mixer/router for flexible mixing and direct routing any input to any output including the headphone output, with zero latency. The FireControl software application lives between your FireStudio Project interface and your DAW software enabling the mixing and routing of input streams coming into your FireStudio Studio Project interface and playback stream coming from your DAW software. The FireControl is capable of creating up to five stereo mixes and then routing to the outputs of your FireStudio Project for headphone mixes and various aux sends. This way everyone in the band and the recording engineer can have a custom mix. Also, the FireStudio Project is loaded with internal flash memory so that all FireControl settings are saved and recalled in the FireStudio Project during power off/on. This allows you to configure your FireStudio as a stand-alone device, without being connected to a computer for uses such as a submixer, A/D and D/A-converter, headphone mixer, format converter, instrument or microphone pre-amplifier!

PC'S: HP XW6000 Dual 3.2GHz Intel Xeon Processors, 8GB RAM WinXP SP2
HP 6005 Pro AMD Athalon X2 B24 3.0Ghz Processor, 4GB RAM Win8 Pro
HP Compaq NC6320 Laptop Intel Core2Duo 2.0Ghz Processor 3GB RAM Win7 Ult
Dell Latitude E4310 Laptop Intel i5 2.67Ghz Processor 4GB RAM Win7 Pro x32

Audio Interfaces: Terratec EWS88MT PCI (2), Audiobox 1818VSL USB & FP10 Firewire, Steinberg MI4 USB, Line 6 Toneport GX & PodXT, Roland GS-10, NI Rig Kontrol 3

Monitors: Yamaha HS50M's

DAWS/VST Hosts: S1 Professional, Plogue Bidule, Xlutop Chainer, Sieb VSTHost & Savihost

Hardware Synthesizers: Roland SH-32 & XV-3080 RedSound Darkstar XP2, Novation X-Station, Yamaha AN200, M-Audio Venom

Hardware Controllers: JL Cooper CS-10 Control Surface, Yamaha EZ-EG, Dillion Les Paul style acoustic electric guitar with Roland GK-3 pickup and GI-20 converter.

The Rest: Guitars, Amps, Stompboxes, Mics, Outboard Gear, VST plugins...too much to list!
[WWW]
danielhuber
Prenoob
[Avatar]

Joined: 13/08/2010 03:59:28
Messages: 12
Offline

cristofe wrote:The FireStudio Project also includes the FireControl mixer/router a 18x10 DSP mixer/router for flexible mixing and direct routing any input to any output including the headphone output, with zero latency. The FireControl software application lives between your FireStudio Project interface and your DAW software enabling the mixing and routing of input streams coming into your FireStudio Studio Project interface and playback stream coming from your DAW software. The FireControl is capable of creating up to five stereo mixes and then routing to the outputs of your FireStudio Project for headphone mixes and various aux sends. This way everyone in the band and the recording engineer can have a custom mix. Also, the FireStudio Project is loaded with internal flash memory so that all FireControl settings are saved and recalled in the FireStudio Project during power off/on. This allows you to configure your FireStudio as a stand-alone device, without being connected to a computer for uses such as a submixer, A/D and D/A-converter, headphone mixer, format converter, instrument or microphone pre-amplifier!


Thanks for the informations.

Yes, i use the FSP mixer for monitoring purposes (cue mixes for band members), but it's not a "1 to 1" application...

Anyway, as you said, we can do this, in this way: http://www.youtube.com/watch?v=Zvf2IXdQEFY

It's not so practical and easy, but will do the job.

And if FSP maintain the configuration when computer system is powered off, will be great! Because my intention it's to record live and the FOH man will be receiving signal from me...
 
Forum Index » FireStudio Mobile & FireStudio Project
Go to: