image description


Is the new SMAART systems able to be controlled via VSL on my IPAD
  Forum Index » Live Sound 
Author
Message
todstr318
Prenoob
[Avatar]

Joined: 06/08/2013 18:46:19
Messages: 7
Location: San Antonio , Texas
Offline

I run "live" sound exclusively- and love the new SMARRT system download. I have it installed on my macbook pro and it is very effective at "shooting a room" and ringing out monitors. I love the Spectragraph which is contained in it, and cant seem to find an IPAD app for this. It would be really nice to be able to run this application remote from my IPAD on stage on while walking around in the room. Is the SMAART system available for the IPAD (remote) - or am I only able to use it with my MacBook pro? By the way, I was using a 2.4 ghz router (Netgear) hooked up to my my MacBook pro- and had a wireless guitar system interfere with it! I have now gone to the 5 ghz router and all is well again. :
gadget69
Presonificator
[Avatar]

Joined: 21/09/2010 03:56:19
Messages: 5008
Location: Northern Mn
Offline

Not implemented on the Ipad as of this writing, but we have asked for it for some time now...
NOTE: If your having an issue, open a tech support ticket and bring the number here if you want help!
http://support.presonus.com

Tools:
OHCI tool and Latency mon:
http://forums.presonus.com/posts/list/11348.page

We, the few, that have done so much, for so long that now we can do everyything with nothing

dbx forum moderator

Lenova Ideapad Z565
Best connectivity Express card/firewire 2 port (400) that does NOT suggest having the TI chipset. (always worked great)
BYTECC Express card (400/800)07150358281

Asus/AMD processor tower. This setups just works on all firewire devices.

Belkin N450 dual band router, works with SL and Ai mixers
Studiolive 16:4:2
SL Ai24.4.2
ABUSB 1818VSL
Faderport
USB pre interface
Studio one Pro V2
LABsubs

loads of audio, and studio gear, and audiophile sound gear (gearslut)
[Email] [Yahoo!]
todstr318
Prenoob
[Avatar]

Joined: 06/08/2013 18:46:19
Messages: 7
Location: San Antonio , Texas
Offline

Is this possible? I already run an IPAD on VSL remote software (and love it). I have a MacBook Pro plugged into my 24.4.2 via the firewire and then use a Netgear 5ghz router to make a secure wireless network for my IPAD to run wireless remote. But could I take my PC laptop (since I'm not using it) and run the Remote software with SMAART programs at the same time. My thoughts are it would be great to get set up wirelessly (remote) using the SMARRT technology, and then go back to my IPAD and put away the PC once my initial setting are done? I really rely on the SMARRT program as I am always in a different environment - and it only takes a few minutes to Shoot the room and then if I could wirelessly use SMAART to ring out all the monitors it would be great! I love the Presonus 24.4.2 but hate the hassle of sitting at my MacBook for long periods of time - and really hope that there is a way to get the SMAART technology without sitting at my wired laptop all nite! :
Jerryd
Presonic

Joined: 28/07/2010 16:01:24
Messages: 698
Offline

I think some guys have used the program " Parallels" or something like that to remote access another computer. In my opinion this really slows it down and is hard to stare at.

Studio 6 makes a Smaart app for iPad that has a functional Spectrograph and does various things. Check it out and see if it would help you in anyway. I have a feeling you are still going to have to walk up to the board for something tho....

We have requested the Spectrogragh to be on the iPad as well as Gain reduction meters for quite some time. Other than that - I probably wouldn't visit the console too much.
todstr318
Prenoob
[Avatar]

Joined: 06/08/2013 18:46:19
Messages: 7
Location: San Antonio , Texas
Offline

Jerryd - Thanks for the answers! I guess I will have to wait, and also hope that they integrate the SMAART technology into the IPAD for us Presonus 24.4.2 users.
 
Forum Index » Live Sound
Go to: