image description


Channel 2 giving out a hum
  Forum Index » 16.0.2  
Author
Message
bolojr2002
Prenoob

Joined: 06/01/2013 00:47:41
Messages: 12
Offline

Hi I have the presonus 16.0.2 mixer and have it for nearly a year, today i noticed that there is a hum coming from channel 2, even if there is no signal going into it, i have even taken the xlr out and tried it in a different channel and it works fine any ideas.
SNS
Presonic
[Avatar]

Joined: 13/01/2011 11:42:59
Messages: 825
Location: denmark
Offline

sorry if i highjack but i am also having some weirdness going on


i also have the 1602 and have my master set to channel 15/16 on the board,sometime i get crackling/distortion(not the good kind)and noise,i then have to change the master output in S1 to channel 1 on the board and back to channel 15/16 then it goes away
http://soundcloud.com/subbasednb
FACEBOOK
http://www.facebook.com/Subbasednb

Frigt Teck Sounddesign
http://www.teamdnr.net/distorted-drums/
SHOW YOUR SUPPORT BUY MY SAMPLEPACK
bolojr2002
Prenoob

Joined: 06/01/2013 00:47:41
Messages: 12
Offline

bolojr2002 wrote:Hi I have the presonus 16.0.2 mixer and have it for nearly a year, today i noticed that there is a hum coming from channel 2, even if there is no signal going into it, i have even taken the xlr out and tried it in a different channel and it works fine any ideas.

But if I cone connect a jack into the channel the hum goes away any ideas
 
Forum Index » 16.0.2
Go to: