image description


Routing
  Forum Index » FireStudio Mobile & FireStudio Project 
Author
Message
RubbaDubbaDoo
Prenoob

Joined: 07/09/2011 11:19:05
Messages: 18
Offline

This is a tough one to figure out.
I am using a FSM. I am confused on how to setup the output routing. ATM I have to unplug the mobo soundcard and switch to the output of the firestudio to hear anything from it. Then to watch movies or listen to mp3s I have to again, replug the mobo soundcard back.
Is there a way to route it so that I can use both?
EX1. All audio, computer sounds and external instruments are routed to the presonus outputs.
EX2. All inputs from firestudio and computer are routed via firewire to the mobo soundcard output and the firestudio output jacks are not used.

When I setup windows output speakers to the presonus I get NO computer sound. Also all computer inputs dissappear from the windows mixer.
when I setup the inputs for cubase I can only have one or the other. Meaning either DX or firestudio...

My build:
W7U (64bit)
GIGABYTE GA-880GMA-UD2H
AMD Phenom II 6x 1090T 3.2Ghz
OCZ 60Gb SSD SATA2 (master/software)
2x 1Tb SATA 7200 WD HDD's (in striped mode) (slave/audio tracks)
8Gb OCZ DDR3-1600/PC3-12800 RAM
ATI Radeon 1Gb DDR5 6870HD
DX11

Tools:
Cubase 5.1
Reason 2.0
Acid 4.0

PS: Will the FS Mobile work in Linux?
RubbaDubbaDoo
Prenoob

Joined: 07/09/2011 11:19:05
Messages: 18
Offline

No replies here either, and my post has been bumped to neverneverland. Thnx moderator :/ Ill be phoning tech support. If I find a solution to this issue Ill post.

-cheers-
 
Forum Index » FireStudio Mobile & FireStudio Project
Go to: